How do we adjust the table to our machine.
Here is how you adjust the table per manufacturer's instructions.
Adjusting the platform height for your folding sewing machine.
NOTE: The platform is attached to the tabletop with metal brackets and has a height adjustment chain on the right-hand side. This chain is attached with a hex head screw to the platform. The other end has an eyebolt which passes through a bracket. The chain and loop of the eyebolt is on the platform side of the bracket and the adjustment nut is on the other side of the bracket.
To lower the platform: Move the nut down to the straight end of the bolt.
To raise the platform: screw the metal nut closer to the round end of the eyebolt. This will shorten the chain and raise the platform.
If the nut is all the way up to the eye and it is not raised high enough for your machine, turn the table over on a carpet or rug. Remove the screw holding the end of the chain. Move the screw over into a different link in the chain and put the screw back in. You may want to place a drop of glue in the hole for added strength.